Installation Guide

Review These Important Safety Guidelines Prior to Installation:
• ALWAYS check local building codes before installing Reflectix
®
.
• ALWAYS check the area you are insulating and make any needed repairs. Any worn wiring should be replaced before you begin installing Reflectix
®
.
• ALWAYS make sure work areas are well ventilated and well lighted.
• ALWAYS use eye protection when operating a staple gun.
• ALWAYS use caution and common sense when using a staple gun. Be aware of where electrical wiring is located. Stapling into a wire can cause
severe shock or death. NEVER staple into electrical wiring.
• ALWAYS be careful when working with large pieces of Reflectix
®
on windy days.
• When installing Reflectix
®
on bright sunny days, it is best to wear sun glasses.
• Do not work in areas such as attics when temperatures are too hot.
• Visit our website at www.reflectixinc.com for additional product and installation information.
Reflectix, Inc.
#1 School Street (P.O. Box 108)
Markleville, IN 46056
Ph: [phone] (US/Can)
[phone]
Fax: [phone]
Email: [e-mail]
Web: www.reflectixinc.com
“Like Us” @: www.facebook.com/ReflectixInsulation
www.youtube.com/ReflectixInsulation
www.pinterest.com/reflectixinc
USA
WITH DOMESTIC AND
IMPORTED COMPONENTS
# MADE IN THE #