Installation Guide

Recommended Products:

Reflective/Bubble/Bubble/Reflective - Roll: BP24025 (24”x 25’)

Staple Tab, Reflective/Bubble/Bubble/Reflective - Roll: ST16025 (16”x 25’), ST24025 (24”x 25’)

Installation Instructions:

• Install R-19, un-faced, per manufacturer’s specifications.

• Place one corner edge of the Reflectix

in an upper corner of the stud cavity. Staple the product to the

side of the stud (creating a 3/4” tab on the product and compressing into the fiberglass (3/4” as well)).

The edge of the product should be flush with the forward corner of the stud.

• Proceed “down” stapling to the side of the stud every 2”- 3”.

• Repeat procedure on opposite stud.

• The Goal: Create a continuous 3/4” air space between the product and the interior panel.

• Finish wall interior.

1. Reflectix

Insulation

2. 2”x 6” Stud

3. Un-faced Fiberglass

4. Exterior Panel

Tools Required:

Safety Glasses

Staple Gun

Tape Measure

Utility Knife/Scissors

DIY Wall - Exterior 2”x 6”| (Total R-21)

(R-3.9 and a Vapor/Moisture Barrier for the Reflectix

)

Reflectix

Installation Instructions