Installation Guide

Recommended Products:

Reflective/Bubble/Bubble/Reflective - Roll: BP24025 (24”x 25’), BP48025 (48”x 25’)

Installation Instructions:

• Measure the width and height of the hot water radiator. It is personal preference (if and) to what degree

the product extends beyond the top and sides of the radiator.

• Simply cut the Reflectix

Reflective/Bubble/Bubble/Reflective product to this dimension.

• Install product flush to the wall and without any contact to the radiator or plumbing.

• Secure the product to the wall utilizing a double-sided tape, Velcro strips, spray adhesive or staples.

1. Reflectix

Insulation

2. Wall

3. Hot Water Radiator

Tools Required:

Safety Glasses

Tape Measure

Utility Knife/Scissors

DIY Behind Hot Water Radiator| (R-3.0)

R-3.0 and a Radiant Reflector

Reflectix

Installation Instructions