Pro Residential, Post Frame and Metal Building Applications

Recommended Products:

Staple Tab, Reflective/Bubble/Bubble/Reflective - Roll: ST48100 (48”x 100’)

Metal Interior with a 3/4” Thermal Break • R-8.2* Heat Flow Horizontal

Open Interior with a 3/4” Thermal Break • R-6.0* Heat Flow Horizontal

Metal Interior with a Nominal 3/4” Drape in Product (No Thermal Break) • R-5.9* Heat Flow Horizontal

Open Interior with a Nominal 3/4” Drape in Product (No Thermal Break) • R-4.7* Heat Flow Horizontal

Installation Instructions: (There are 2 options)

1. Installed with 3/4” Thermal Breaks

• Install Reflectix

Reflective/Bubble/Bubble/Reflective, Staple Tab product vertically, using 1/2” self

tapping screws. This will secure the insulation to the exterior of the C or Z girts.

• Tape the seams with a Reflectix

Foil Tape (goal is an air-tight, snug seam seal).

• Install a 3/4” thermal break and attach corrugated metal exterior finish.

• If an interior finish is applied, install the interior panels to the interior face of the girts.

1. Reflectix

Insulation

2. Exterior Wall Panel

3. 3/4” Thermal Break

4. Girt

5. Red Metal (Structural

Frame)

Tools Required:

Safety Glasses

Tape Measure

Utility Knife

Screw Gun

Staple Gun

Metal Building / Wall / New

Reflectix

Installation Instructions