Technical Specifications

Reflectix
®
Insulation
Double Bubble
Metalized Both Sides
Reflectix
®
Insulation consists of two outer layers of metalized
polyester. Each layer is bonded to a tough layer of polyethylene
for strength. Two inner layers of insulating bubbles resist conduc-
tive heat flow while a center layer of polyethylene gives Reflectix
®
high reliability and strength.
P.O. Box 108 • Markleville, IN • 46056
Phone: [phone] or [phone] • Fax: [phone] • T85 Revised 1012
Technical Data:
Temperature Range: -60 degrees to +180 degrees F
Nominal Thickness: 5/16 inch (.312)
Weight: 1.25 oz./sq. ft.
Flame Spread Index (ASTM E 84): Less than 25
Smoke Developed Index (ASTM E 84): Less than 50
Fire Rating: Class A/Class 1
Linear Shrinkage: None
Reflectance (IR): 94% +
Fungi Resistance: No Growth
Emittance: Less than 0.06
Pliability: No Cracking / No Delamination
Bleeding and Delamination: Passed
Elevated Temperature & Humidity Resistance:
Delamination: None
Corrosion: None
Loss of Metalization: None
Permeance After Aging: 0.024
Permeance Before Aging: 0.015
Technical Information
RDB1