Installation Guide

Recommended Products:

Reflective/Bubble/Bubble/Reflective - Roll: BP48025 (48”x 25’)

Installation Instructions: (There are 2 options)

1. Spiral Wrap Directly Against Duct

(Reflective/Bubble/Bubble/Reflective, Duct Insulation - Roll product)

• Make sure all metal joints, seams and penetrations are sealed.

• Spiral wrap Reflectix

around the duct, overlapping 2” as you proceed.

• If necessary, trim width of product to accommodate bends or diameter changes in the duct.

• Securely tape seams with a UL 181 Tape (goal is an air-tight, snug seam seal).

• Do not leave any exposed duct or space where air can enter between the duct and the Reflectix

2. Standard Wrap (Reflective/Bubble/Bubble/Reflective - Roll product)

• Make sure all metal joints, seams and penetrations are sealed.

• Verify circumference of the duct.

• Cut the Reflectix

product to this length plus 2”.

1. Reflectix

Insulation

2. Metal Duct

3. UL 181 Tape

Tools Required:

Safety Glasses

Tape Measure

Utility Knife/Scissors

Duct Insulation| (R-4.2)

Reflectix

Installation Instructions