Installation Guide

Recommended Products:

Staple Tab, Reflective/Bubble/Bubble/Reflective - Roll: ST48100 (48”x 100’)

Inside the Girts

Metal Interior • R-6.3 Heat Flow Horizontal

Open Interior • R-5.3* Heat Flow Horizontal

Outside the Girts

Metal Interior • R-5.5 Heat Flow Horizontal

Open Interior • R-4.7* Heat Flow Horizontal

Installation Instructions: (There are 2 options)

1. Product Inside the Girts

• Attach the product using 5/16” staples at approximately 4” intervals.

• Staple the Reflectix

Reflective/Bubble/Bubble/Reflective, Staple Tab product to the outside of the top

girt.

• Staple the product to the inside of the remaining girts.

• Tape the seams with a Reflectix

Foil Tape (goal is an air-tight, snug seam seal).

1. Reflectix

Insulation

2. Exterior Wall Panel

3. Girt

4. Post

(Note: Applicable for both

diagrams)

Tools Required:

Safety Glasses

Tape Measure

Utility Knife

Staple Gun

Post Frame Building / Wall / New

Reflectix

Installation Instructions

2 1

312