Instructions

PHONO ENCODING
Insert the USB device.
Press the function button to “ phono “.
Start playback at phono for the track which you want to record to usb.
Press the RECORD button two times to start encoding.
The display show REC.
After finish of recoding, press the STOP button to stop recording.
CASSETTE ENCODING
Insert the USB device.
Press the function button to “TAPE“.
Start playback at TAPE for the track which you want to record to USB.
Press the RECORD button two times to start encoding.
The display show REC.
After finish of recoding, press the STOP button to stop recording.
REMOVING OF USB / MEMORY CARD
To remove the usb, turn off the power or switch the function mode to either cd, aux or tuner first. Un-plug it by pulling
out the usb socket directly.
DELETE TRACKS FROM USB
Insert the USB device.
Press the function button to “CD/USB “.
Press the button FUNCTION to select USB device.
During playback or STOP condition, press the button DELETE from Re-mote Control to delete the current track.
SPECIFICATIONS
Power supply AC 220-240V, 50-60Hz
Radio MW: 520-1600KHz / FM: 87.5-108MHz
Turntable 33/45/78 RPM
CD CD/CD-R/CD-RW/MP3
USB compable with MP3 les stored on USB drives up to 32GB
Tape deck suitable C60 - C90
Output power 2 x 2.5W
Power consumption 19W max.
DECLARATION OF CONFORMITY
We, Ultramedia gmbh as importer of this product, declare that this model is conform to the following European dire-
tives:
2014/53/EU (RED)
2011/65/EU (RoHS)
19