Instructions

20
SWITCH THE UNIT ON / OFF
Turn on a device:
1. Turn the [FUNCTION] control to switch on the device and select an
operating mode.
2. If the device is switched on, the [POWER] LED lights up red.
Switching off the device:
1. Turn the [FUNCTION] control to the “Off” position to switch the device
off.
2. If the device is switched off, the power LED does not light up.
Note:
 The device automatically switches to standby mode after approx. 15
minutes if there is no playback in Phono Mode, AUX-IN Mode and
Bluetooth mode.
 To switch the device on again. Turn the function knob to the OFF
position. Then turn the function knob to the desired mode to switch the
device on again.
ADJUSTING THE VOLUME
 To change the volume, turn the [VOLUME] control until the desired
volume is reached.
SETTING THE FUNCTIONAL MODE
1. To select the function mode, turn the [FUNCTION] control to the desired
function mode.
2. The following function modes are available.
 TAPE (OFF): Cassette mode
 TURNTABLE / AUX Turntable / AUX-IN mode
 FM: FM mode
 BT: Bluetooth mode