Instructions

CONNECT SPEAKER
1. The left speaker has two chopping on the right side and the right speaker has two chop on
the left side to fold out to connect the speakers to the main unit.
2. Connect the speakers to the main unit by pushing the speakers into the main unit with the
hacks open and sliding them down.
3. Plug the speaker cable for the left speaker into the left speaker output [SPEAKER L] (17)
and the speaker cable for the right speaker into the right speaker output [SPEAKER R] (18).
CONNECT POWER SUPPLY
1. Connect one end of the external power supply to the [DC IN] jack (19) of the vertical unit.
2. Plug the other end of the power cord into the wall outlet.
Note:
Compare the specifications of the external power supply with your home power supply and
connect the power supply to your home power supply only if they match.
POWER ON / OFF
1. Press the [POWER / SOURCE] button (1/26) to turn on the unit.
2. Press and hold the [POWER / SOURCE] button (1/26) for about 3 seconds to put the device
into standby mode.
3. Press the [POWER / SOURCE] button (1/26) when the power is on to select the different
modes.
SETTING THE CLOCK
1. Press and hold the [MENU] button (9/32) for about 3 seconds to enter the device menu.
2. Press the [SELECT] button (8/33) to enter the system menu.
3. Press the [TUNE + / ►►] (4/37) or [TUNE- / ◄◄] (5/35) buttons and navigate to the
"Time" menu item.
4. Press the [SELECT] button (8/33) to enter the clock setting.
5. You can make the following settings.