Instructions

Note:
Playback can also be controlled using the Connected Bluetooth device.
AUX IN MODE
1. Press the [SOURCE] button (1/27) repeatedly until "AUX IN" appears in the display.
2. Use a 3.5mm aux cable (not included) to connect the device to an external playback device.
3. Insert the AUX cable one end into the [AUX IN] (16) jack and the other end into the external
playback device.
4. Playback is controlled by the external audio player.
5. The basic volume is set on the HIF5340DBT and the playback volume is controlled by the
externally connected audio device.
SYSTEM MENU
1. Press and hold the [MENU] button (9/32) for about 3 seconds to enter the device menu.
2. Press the [TUNE + / ►►] (4/37) or [TUNE- / ◄◄] (5/35) buttons and navigate to "System".
3. Press the [SELECT] key (8/33) to enter the system menu.
4. Press the [TUNE + / ►►] (4/37) or [TUNE- / ◄◄] (5/35) buttons to navigate in the menu.
5. The following menu items are available.
Sleep: Set the time after which the device should automatically switch to
standby mode.
Off / 15/30 45 60 90
Alarm clock: Set an alarm clock. See Alarm clock setting.
Time: Set the time. See clock setting.
Backlight: Set the backlight.
Language: Set the menu language.
Factory setting: Reset all settings to the factory settings.
Software Upgrade: Perform a software update via USB stick.
SW version: Displays the current software version.