Instructions

Note:

 The number of bars in the WLAN icon in front of the network name

(SSID) indicates the relative signal strength of the network.

 The key symbol indicates that the network is protected by a password.

 If the device can not find wireless networks, no wireless networks will

be displayed. If necessary, change your location and check your

wireless router.

 The SSID of your access point can be found in the configuration of the

access point (router).

3. CONNECT THE DEVICE TO THE NETWORK

1. Select your network and confirm with [ENTER] key.

2. If your WLAN is password protected, you will be asked to enter your

password.

3. Enter the password using the buttons on the unit or the number and

letters of the remote control.

PASSWORD ENTRY (DEVICE)

1. Press the [▲ / ▼] buttons to select the numbers, letters or special

characters.

2. Press the [◄ / ►] buttons to move to the next or previous column.

3. If you have entered the password completely, press the [ENTER] key

to confirm the entry.

4. The device will now connect to your Wi-Fi.

NOTE:

• When entering the password, pay attention to the use of uppercase

and lowercase letters.