Instructions

Manual configuration

DHCP

You can select DHPC (the automatically assigned IP address) or manually

enter the IP address for the wireless network connection.

DHCP (On): Automatic IP assignment.

DHCP (Off): Manual IP assignment.

If you select the manual setting for the cable connection, you must enter:

 SSID (the name of the access point);

 IP addressed;

 Subnet Mask;

 Default Gateway;

 Preferred DNS server;

 Alternative DNS server.

You can select (manage) a specific network if you have more than one

network connection in an area.

1. Check the network at power up

Enable / Disable WiFi network.

When you turn on the Wi-Fi network, the system automatically searches for

the available access point. Select the desired AP.

2. Enter the WEP or WPA code to connect to the WLAN.

3. If the wireless network connection does not exist or failed, the icon will

be displayed in the upper left corner with a cross.

Check network when switching on

Activate the setting to have the device automatically search for available

networks and connect directly.