Instructions

66
NETWORK PREPARATION
For the W-LAN network connection:
1. For the wireless connection, check the wireless access point or router
light. For information about the device, refer to the respective operating
instructions of the devices.
2. Plug the power adapter into the back of the HRA19INT and plug it into
the DC IN jack.
3. When the unit is first turned on, you will be prompted to set the
language and network configurations.
Note:
 Wi-Fi enables data transfer over short distances within 20 meters
without the need for cabling between devices. Walls or cells can reduce
the strength of the Wi-Fi connection.
 Therefore, try to locate the HRA19INT and / or the access point at the
above distance and avoid obstacles between two devices.