Manual

SAFETY INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS - PLEASE READ CAREFULLY BEFORE USE.

Follow the safety instructions on the back of the TV.

Warning to Prevent Electric Shock. Do not remove the covers. No user-serviceable parts

in the device. Have the device serviced by qualified personnel.

This symbol indicates important operating / maintenance instructions of this device in

the operating instructions.

This symbol indicates the risk of electrical shock due to life-threatening voltage in this

device.

Follow these instructions:

 Do not use this TV near water.

 Use a lightly moistened cloth for cleaning.

 Do not cover any of the ventilation holes.

 Set up the unit according to the supplied Quick Start Guide and this manual.

 Be careful not to pinch or run the power cord, especially when plugged into the power

outlet and DC input.

 Avoid routing the power cord over sharp edges.

 Disconnect the TV from the mains during thunderstorms or prolonged periods of non-

use.

Be careful not to expose the unit to rain or moisture to reduce the risk of fire or

electrical shock. The TV should be kept away from spray and dripping water and no

objects filled with liquids should be placed on the TV.

Note:

Do not place any open heat sources (stoves, candles, etc.) near or on the TV.

IMPORTANT SAFETY INSTRUCTIONS

This device complies with all current safety regulations. The following safety tips are intended to

protect the user from reckless use and the resulting dangers.

 This device was manufactured with the greatest care and subjected to a strict final

inspection. However, as with any other electrical device, there is a possibility that

problems can arise. In the event of smoke development, excessive heat development or

any other unnatural phenomenon, immediately disconnect the device from the mains.

 The power plug or device plug is used to separate the device from the power supply and

should be easily accessible at all times.

 Only connect the device to power sources that meet the specifications of the device. You

can find these on the back of the device and in the operating instructions.

 The mains socket should be close to the device and must be easy to reach.

 Pull the power cord out of the socket by the plug. Never pull on the power cord itself, it

could be damaged and cause a short circuit.

 When using a multiple socket, do not connect too many devices to the multiple socket to

avoid overloading.