Manual

EN
53
5. Press the [OK] key to confirm the entry and enter the tuner selection.
Note:
 If you have selected Satellite / DVB-S for the "input source". After the
confirmation, you can load the "Standard sender list".
 Set the "LCN" function to "Off" for the DVB-T / C station search. If the setting is
"On", this prevents the stations from being sorted and assigns each station a fixed
program slot.
6. Set the "LCN" function to "Off" for the DVB-T / C station search. If the setting is "on", this
prevents the stations from being sorted and assigned to each other.
7. You can change the settings with the [▲ / ▼ / ◄ / ►] buttons.
8. For different input sources, the following setting options are available:
DVB-C
Tune Type: DTV / ATV
Scan Type: Full / Network Scan
Netzwork ID: The menu item is only active if network search is selected.
Frequency: The menu item is only active if network search is selected.
Symbol (ks/s): The menu item is only active if network search is selected.
Sorting by LCN: On / Off (Turn the option off because otherwise the
station sorting will not work).
DVB-T
Tune Type: DTV / ATV
Scan Type: The menu item is fixed and can not be edited.
Netzwork ID: The menu item is fixed and can not be edited.
Frequency: The menu item is fixed and can not be edited.
Symbol (ks/s): The menu item is fixed and can not be edited.
Sorting by LCN: On / Off (Turn the option off because otherwise the
station sorting will not work).
SATELLITE
Satellite: Select the satellite. Astra 19,2E is the default.
Scan Mode: Default / Blind Scan / Network Scan
Cannel Type: All Channels / FTA Channels
Service Type: All / DTV / Radio
9. If you have selected "DVB-C" or "DVB-T" and confirmed the settings with the [OK] key
Starts the automatic search.