Manual

10. When the scan is complete, the unit enters TV mode and the initial installation is

complete.

11. If you have selected "Satellite" and confirmed the settings with the [OK] button, you will

be asked to load the standard station list.

Do you want to load presat channel list?

If you have selected satellite as the input source, after confirming the settings you will be asked

to load the standard station list. It is recommended to confirm the setting with "Yes". The station

list is adapted and pre-sorted for the German TV reception and can be further processed

afterwards.

 YES: Go to "Yes" to load the standard station list.

 NO: Go to "No" to start the channel search normally.

12. Select "Yes" or "No" and press the [OK] key to confirm.

13. The search is started now or the default sender list is loaded. The process can take some

time.

14. Afterwards, the TV set switches to TV mode and the initial installation is complete.

Channel Menu DVB-C/ T

1. Press the [INPUT] key.

2. Use the [▲ ▼] buttons to navigate in the menu.

3. Select "DTV" and confirm your entry with the [OK] key.

4. Press the [MENU] key and navigate to "Channel".

5. Confirm the entry with the [OK] key.

6. The following menu items are available in the "Channel" menu:

7. Use the following keys to navigate in the menu.

▲▼◄►: Navigate / select menu item

OK: Confirm selection

MENU: Open menu / menu item back.

EXIT: Exit menu.

Note:

 In the "Channel" menu, set the "5V antenna power" option to "On" when the

supplied active antenna or other active antenna is used.