Manual

EN
57
Programme Edit
Opens the menu to edit the channel list.
1. Select the menu item "Edit channel list" and press the [OK] key.
2. Use the [▲ ▼] buttons to navigate in the menu item.
Note:
 A detailed description can be found in the operating instructions under the item
"Programme Edit".
Signal Information
Shows transmitter / transponder and signal information.
The menu item is only available in DTV (DVB-C / T) / satellite mode.
The signal information includes:
Transmitter / Quality / Signal / Network / Modulation
1. Select the menu item "Signal Information" and press the [OK] key.
2. Use the [MENU] key to return to the "Station" menu.
3. Using the [EXIT] key
Note:
 The menu item can only be selected when a signal is present.
CI Information
Displays information about the inserted CI module and the smart card.
The menu item gives you information about the inserted CI module and the card.
1. Select the "CI Information" item and press the [OK] key.
2. Use the [▲ ▼ ◄►] buttons to select the various menu items.
3. Confirm the entry with the [OK] key.
4. To exit the menu, press the [EXIT] key.
Note:
 The following types of reception are supported: DVB-C, DVB-T / T2HD, DVB-S / S2.
5V antenna power
Use the [◄►] buttons to set the "On" or "Off" setting.
Switch the menu item to "On" to activate the 5V power supply for active antennas. For passive
antennas, switch the setting to off.
Note:
 Please note the details of your DVT-T antenna.
CHANNEL MENU (SATELLITE)
Sender Menu Satellite
1. Press the [INPUT] key.
2. Use the [▲ ▼] buttons to navigate in the menu.
3. Select "Satellite" and confirm your entry with the [OK] key.
4. Press the [MENU] key and navigate to "Sender".
5. Confirm the entry with the [OK] key.
6. The following menu items are available in the "Channel" menu:
Auto Tuning / Programme Edit / Signal Information / CI Information / Dish Setup