Manual

EN
58
Auto Tuning
1. Select the menu item "Automatic station search" and press the [OK] key.
2. Use the [▲ ▼ ◄►] buttons to select the various setting options.
3. Confirm the entry with the [OK] key.
4. The search starts.
5. To pause the station search, press the [EXIT] key.
6. The following setting options and menu items are available:
Country: Select the country.
Satellite: Select the satellite. Astra 19.2E is set as default.
Scan Mode: Default / blind Scan / Network Scan
Channel Type: All Channels / FTA Channels
Service Type: All / DTV / Radio
Programme Edit
1. Select the menu item "Edit channel list" and press the [OK] key.
2. Use the [▲ ▼] buttons to navigate in the menu item.
Note:
 A detailed description can be found in the operating instructions under the item
"Programme Edit".
Signal Information
The menu item is only available in DTV (DVB-C / T) / satellite mode.
The signal information includes:
Transmitter / Quality / Signal / Network / Modulation
1. Select the menu item "Signal Information" and press the [OK] key.
2. Use the [MENU] key to return to the "Station" menu.
3. Using the [EXIT] key
Note:
 The menu item can only be selected when a signal is present.
CI Information
The menu item gives you information about the inserted CI module and the card.
1. Select the "CI Information" item and press the [OK] key.
2. Use the [▲ ▼ ◄►] buttons to select the various menu items.
3. Confirm the entry with the [OK] key.
4. To exit the menu, press the [EXIT] key.
Note:
 The following types of reception are supported: DVB-C, DVB-T / T2HD, DVB-S / S2.
Dish Setup
1. Select the menu item "Sat configuration" and press the [OK] key.
2. Use the [▲ ▼ ◄►] buttons to navigate in the menu.
3. Use the [MENU] key to return to the "Station" menu.
4. With the [EXIT] key.
5. In the "Dish Setup" menu, you have three menu columns to choose from.