Manual

 In the satellite and

transponder list you will see a

list of all satellites and the

associated transponders.

 In the right column you will

find the LNB settings.

6. The following options for editing

satellites and transponders are

available in the "Sat configuration"

menu:

Delete [Red]:

1. Select a satellite or transponder to be deleted with the [▲ ▼ ◄►] buttons.

2. Press the [OK] key to mark the satellite

or transponder.

3. Press the [RED] key to delete the

selected satellite / transponder.

4. Confirm the entry with the [OK] key.

5. A confirmation prompt appears.

 [OK]: Press the [OK] key to

confirm the deletion.

 [EXIT]: Press the [EXIT] key to

cancel the deletion.

Edit [Green]:

1. Select a satellite or transponder you want to edit with the [▲ ▼ ◄►] buttons.

2. Press the [OK] key to mark the satellite or transponder.

3. Press the [Green] button to enter the satellites and transponder settings.

4. Press the [OK] button when you have made all the settings to apply the setting.

5. Settings for editing satellites and transponders.

Satelite editing:

Satellite Name: Edit the name of the satellite.

Longitude Direction: East / West

Longitude Angle: Enter a new longitude angle.

Band: Ku / C

Transponder edit:

Frequency: Enter a new frequency.

Symbol (ks/s): Enter a new symbol rate.

Polarity: H (Horizontal) / V (Vertical)

Add [Yellow]

1. In the transponder or satellite list, press the

[Yellow] key to manually add a satellite or

transponder.

2. Press the [OK] button when all settings have

been made to apply the setting.

3. Settings for adding new satellites or

transponders.