Manual

EN
63
 The recording function is only available for non-encrypted TV channels /
programs.
Programming EPG recording
1. Press the EPG button.
2. Use the [▲ ▼] buttons to select a TV program.
3. Press the [►] button to switch to the TV programs.
4. Use the [▲ ▼] buttons to navigate and search for the desired TV show.
5. Press the [Red] button to mark the TV show for recording.
6. By repeatedly pressing, you can change the recording function or delete the recording
again.
R: Starts a one-time recording
D: Starts a daily recording for programs daily at the same time be broadcast.
W: Starts a weekly recording for broadcasts once a week be broadcast.
Programming manual recording
1. Press the [MENU] button and navigate to "Transmitter".
2. Press the [OK] button and go to "Timer list".
3. Press the [OK] button to open the menu.
4. Existing timers are displayed in the menu or new timers can be set. The timers made in
the EPG menu are also displayed here.
5. The following settings are available in the menu.
Delete: Press the [Red] button to delete a highlighted timer.
New: Press the [Yellow] button to create a new timer.
Program: Select current program.
Type: Reminder / RECORDER
Mode: Once / Daily / Weekly
Start time: Set the time and date.
End time: Set the time and date.
Edit: Press the [Blue] button to edit an existing timer.
Exit: Press the [Exit] button to exit the menu.
Start recording immediately
1. Press the [EMPTY] button on the remote control to start recording.
2. To stop recording, press the [STOP] button.
3. Press the [◄] or [►] key to stop or continue recording.
HDMI CEC / ARC
1. To activate the HDMI CEC control press connect an HDMI CEC compatible device to the
HDMI port of the device.
2. Press the [Menu] button and go to the "Configuration" menu.
3. Select the menu item “HDMI CEC”.
4. You have the following setting options in the menu:
HDMI CEC: On / Off
Activate / deactivate the HDMI CEC control.
HDMI ARC: On / Off
Audio transmission via HDMI cable. Only possible with ARC compatible devices.