Manual

TIME MENU

1. Press the [MENU] key on the remote control.

2. Press the [▲ ▼ ◄►] buttons to navigate in the menu.

3. Select the menu item "TIME" and press the [OK] key.

4. In the menu, use the [◄► ▲ ▼] buttons to navigate.

5. Confirm the entry with the [OK] key.

6. Press the [MENU] key to return to the previous menu.

7. Close the menu with the [EXIT] key.

8. The following selection and setting options are available in

the menu:

Note:

 The menu item Clock adjusts itself automatically

and if a cable / satellite / antenna signal is present.

Clock: Automatic adjustment when

an input signal is present

Time Zone: Set the time zone according to your whereabouts.

Off Time: Set the automatic switch-off time "On" or "Off".

On Time: Set the automatic switch-on time "On" or "Off".

The following settings can be made for the switch-on time

in the menu: Hour / Minute / Source / Channel / Volume

Sleep-Timer: Set the time after which the unit automatically switches to

standby mode.

Off / 10min / 20min / 30min / 60min / 90min / 120min /

180min / 240min (Details in minutes)

Auto Stanby: Set the time after which the device should switch to

standby mode when there is no signal or no operation.

Off / 3H / 4H / 5H (Details in hours)

OSD Off Timer: Set the time after which the menu displays will be

automatically hidden when no operation is taking place.

Off / 5 /10 / 15 / 20 / 25 / 30 / 35 (Details in seconds)

SETUP MENÜ