Manual

EN
70
Default Source:
1. Press the [◄►] buttons to select one of the various sources as the start source.
2. The following options are available: Off / Satellite / DTV / ATV / AV / SCART / YPbPr / DVD
/ PC / HDMI / USB
Note:
 If you have selected satellite / DTV / ATV as the start source, you can select a
"start channel".
Default Prog.:
1. Use the [◄►] buttons to select a start channel with which the device should start when
it is switched on.
2. The menu item is only active if “Satellite / DTV / ATV” has been selected for “Start
source”.
Default Volume:
1. Set a standard volume with which the device should start.
2. You can set the value with the [◄►] buttons.
Max Volume:
1. Set the maximum volume that can be set on the device.
2. You can set the value with the [◄►] buttons.
Import Database:
Import the exported database.
1. Insert the USB stick with the exported data into the USB socket on the back of the device.
2. Press the menu item with the [►] button.
3. The exported data will now be exported from the USB stick to the device.
4. The device switches off and on again after a short time.
5. The database is now imported.
Export Database:
Export your settings: Sound / Picture / Satellite / DTV / Time etc.
1. Insert an empty USB stick into the USB socket on the back of the device.
2. Press the menu item with the [►] key to export the database.
3. The device now displays "Database exported successfully".
4. The database has been exported and can now be used to import to a device with the
same device type and software version.
Clear Lock:
Reset the hotel mode settings to the default settings.
1. Press the [►] button to reset all settings made in Hotel mode.
2. The "Hotel Mode" is then set to "Off" and the "Hotel Mode" settings are no longer
selectable.
USB MEDIA PLAYER
1. Press the [Input] button on the remote control.
2. Press the [▲ ▼] key to navigate in the menu.
3. Select the menu item "USB".