Instructions

7
SETTING THE FUNCTIONAL MODE
1. To select the desired function mode, press the [ / M] key repeatedly.
2. The selected mode is announced over the loudspeaker.
3. The following function modes are available.
USB / BLUETOOTH / AUX / FM
Note: The function modes are acoustically output by the device when the source is
changed.
VOLME ADJUSTMENT
1. To change the volume, turn the volume control [Music +/-] on the device.
2. To change the microphone volume, turn the microphone volume control [Mic +/-]
on the device.
EQUALIZER (EQ) FUNCTION
1. This device has a built-in equalizer system.
2. Press the [EQ] key repeatedly to select the different equalizers.
3. The following equalizers are available.
Normal, bass, rock
ADJUST MICROPHONE ECHO
1. To set the echo effect for the microphone, turn the echo control [Echo +/-] on
the device.
SET LED EFFECT
1. To switch on the lighting effect from the loudspeaker, press and hold the [EQ]
button for approx. 3 seconds.
2. To switch off the lighting effect from the loudspeaker, press and hold the [EQ]
button for approx. 3 seconds.
FM MODE
1. Press the [ / M] button on the device until FM is selected.
2. FM playback starts with the radio station you last listened to.
Automatic search: Press and hold the [►▌▌] button for approx. 3 seconds to
start the automatic search.
Saved selection: To go to the last or next saved station,
press the [</>] button.
Manual search: To search for the next available station,
briefly press the [</>] button.