Manual

EN
52

LAN connection: Connect the LAN cable from your router to the socket
on the TV set. The network settings are made automatically (connection status:
connected, the IP address is displayed here).

WLAN connection: Press the button repeatedly until you are in the
WLAN settings.
W-LAN: In this menu you can switch the W-LAN function on / off.
IP: The IP address is displayed here if the device is connected to a network.
Network name: The W-LAN networks found are displayed here.
1) Select your W-LAN and press the button.
2)
The Password menu item is selected automatically.
3) Press the button to open the keyboard for entering the password.
4)
Enter your W-LAN password from the router. Use the
buttons to select the letters / numbers / characters. Confirm your
entry with the button. Once you have entered the password,
navigate to the symbol (►) at the bottom right of the keyboard and
press the button.
5)
After you have successfully entered the password, the device is
connected to the network.