Manual

PREPARE THE DEVICE

Check that all required cables and connections are available.

1) Install the stand foot with the included screws.

2) Connect the included power supply or car adapter to the POWER INPUT socket of the

device. Connect the other side of the power supply or car adapter to the appropriate

voltage source.

3) Insert two AAA batteries into the supplied remote control.

4) Connect your satellite antenna (TV1) or cable system / DVB antenna (TV2) to the

device.

5) Connect all other external devices (e.g. Blu Ray player, etc.) to the appropriate

connections on the TV set.

Note:

 Place the TV set on a level and stable surface.

PREPARE THE DEVICE

Device on / off (standby)

TOGGLE

SWITCH

Completely off (off) or standby (on).

SOURCE

Input source menu open / close.

▲▼◄►

Menu navigation (up / down / left / right).

Select or confirm a menu item. Open station list.

Open or close the main menu.

EXIT

Menu item back.

VOL+ / VOL-

Adjust the volume (louder / quieter).

CH▲ / CH▼

Switch programs (up / down).

/ MUTE

Mute the sound (On / Off).

SMART

Switch to Smart TV mode.

FIRST INSTALLATION

Once you have connected the device and all devices, follow the next steps to carry out the initial

installation of the device.

1. Press the toggle switch on the device so that it is on.

2. Press the / Power button to switch on the device.

3. A menu overlay for setting up the Smart TV appears on the screen.