Manual

UK
60
3. Press the OK button to enter the Time menu.
4. The following menu items are available in the Time menu:
Date
Displays the date. Cannot be set manually. Is set via the TV signal.
Current Time
Displays the time. Cannot be set manually. Is set via the TV signal.
Sleep Timer
Set a time after which the device should automatically switch to
standby mode. Can also be set using the SLEEP button.
Auto Standby
Set the time after which the device should automatically switch
to standby mode if no operation takes place.
EPG
1. Press the EPG button to open or close the EPG menu.
2. You can use the following buttons to operate the EPG menu.
EPG
Open / close EPG menu.
▲▼◄►
Navigate in the menu.
RED button
Programming a USB recording
Yellow button
Shows the programmed recordings.
Blue button
Set up a reminder for a program.
PROGRAM USB RECORDING
1. Insert an empty USB stick or a hard drive into the USB port of the device.
2. Press the MENU button and navigate to Function.
3. Press the OK button and select the PVR option menu item.
4. Press the OK button to open the menu.
5. Under Select Disk, select the USB storage device on which the recordings are to be
saved.
6. Then go to Format hard disk so that the USB storage device is brought into the correct
format.
Attention:
 When formatting, all data will be deleted from the USB memory.
7. The USB storage device is now prepared for recording.