Manual

3. Connect your satellite system, cable system or DVB antenna to the DVB-S2 or DVB-

T2/C connections.

4. Connect all other external devices (e.g. Blu Ray player etc.) to the appropriate

connections on the TV set.

Note:

 Place the TV set on a flat and stable surface.

BASIC OPERATION

Device On / Off (Standby).

Input Sources Menu: Open / Close.

Menu (Up / Down / Left / Right).

Select or confirm a menu item. Open the channel list.

Open or close the main menu.

Menu item back.

Switch to Smart TV mode

VOL: Louder / Quieter

CH: Next / Previous programme

Mute Sound (On / Off).

FIRST INSTALLATION

Once you have connected the unit and connected to all units, follow the next steps to

perform the initial installation of the unit.

1. Operate the toggle switch on the unit so that it is in the on position.

2. Press the key to switch on the unit.

3. A menu for setting up the Smart TV will appear on the screen.

4. Press the key to move to the next menu item.

5. Language: Now set the desired menu language. "German" is preset as the default

language. Press the key to continue with the German menu language.

Press the key to adjust the menu language. Then use the or key to

select the desired menu language. Press the key to confirm the selection. Press

the key again to move to the next menu item.

6. Network setting: Depending on the connection, you can make WLAN settings

(wireless) or LAN settings (wired connection) to connect the unit to the Internet. If you