Manual

UK
57
DISEqC 1.0: Only active if DISEqC 1.1 is switched off.
Adjust the setting according to your multi-switch
configuration.
DISEqC 1.1: Only active if DISEqC 1.0 is switched off.
Adjust the setting according to your LNB / multiswitch
configuration.
DISEqC 1.2: Motor settings. Activates the Limit Settings
menu item.
Motor Setting: Only active if DISEqC 1.2 is set to On. Set
the position settings for the satellite.
CI Information
Displays information about the inserted CI module and
card. Only active if a module is inserted. The module and
card are not included in the scope of delivery and must
be purchased separately from the reception provider.
Signal Information
Displays reception information of the selected station.
Only active when a station has been found.
DVB-T
Auto Search
Starts the automatic channel search. The channels are
automatically added to the channel list.
Country Select: Select the country according to the
installation site.
Search Type: Select the search type.
 ATV+DTV
 DTV (Recommended)
LCN Option: Set the LCN option On or Off. It is
recommended to set it to Off, otherwise the yellow
button in the Edit Channel menu is disabled.
Search: Starts the search.
Note:
 Please note that you must switch the option 5V
antenna voltage On or Off according to the antenna
used before the search run.
DVBT Manual Search
Starts the manual channel search. The channels are
automatically added to the channel list.
Frequency: Displays the frequency of the transmitter.
Current CH: Select the programme. At the same time,
the frequency is adjusted.
Search: Starts the search.
Signal Quality: Displays the signal quality.
Signal Strength: Displays the signal strength.
5V Antenna Feedback
Set the 5V supply voltage for external antennas at the
DVB-T2/C connection On or Off.
 Passive antenna = Off