User Manual
USB CONNECTIVITY
ISIS is capable of streaming Internet radio and running MP3, WMA, WAV or any other 16bit/44.1
& 48K files direct from your PC or laptop via the USB interface. This connection method uses
the internal DAC to play your music at the highest possible quality.
Connect a USB A-B type lead (as illustrated) from the ISIS USB to a USB output on your PC.
Switch on your ISIS CD player and select USB via the remote. The display will read:
The standard Windows
‘found new hardware’
dialogue will be displayed on your PC in the
bottom right hand corner of the screen.
The ISIS will be recognised as ‘USB AUDIO DAC’. Installation should be automatic as no driver
disc is required. After a short period ‘
your new hardware is installed and ready to use’
should
appear to confirm that connection and installation has been successful.
It is recommended to switch off any other system sounds emitted by the PC via the control
panel. The ISIS DAC will automatically become the default for your PC whilst connected. Once
disconnected the previous default will be restored. If this does not happen you can manually
reset as follows :
Windows XP
-
Control panel /Sounds and audio devices/Audio/Sound Playback (default device).
Windows Vista
-
Control Panel/Hardware and Sound/Manage Audio Devices/select ‘USB AUDIO DAC’ from list.
Note: It is also possible to disable the ISIS via the device manager by right clicking on the
highlighted ‘USB AUDIO DAC’ and then clicking disable.
Mac OS
-
System Preferences/Sound/Output/Select Audio USB DAC.
11
86%6(/(&7('
86%FRQQHFWLRQ,6,6³3&
86%$%OHDGQRWVXSSOLHG