Specifications

13
Loudspeakers
The Mira 3 amplifier is capable of driving all normal hi-fi
loudspeakers. (Most loudspeakers have a nominal impedance of 8
Ohms).
If driving loudspeakers of unusually low impedance (4 Ohms or less),
ensure that you check with your dealer for compatibility.
Loudspeaker Cable
We recommend using good quality cable such as our own, or similar
types made by other quality hi-fi companies. Very expensive cable
claiming to use special materials and technologies, along with 'solid
core' or OFC types, are not recommended, as they often do not
represent value for money. Try to keep cable runs to either speaker
short and of similar length. Your REGA dealer will be able to make up
specific lengths of cable for you with plugs already fitted. Never join
cables together to increase their length.
Damage by shorting: Never short (i.e. touch together), the bare
ends of speaker cable on any amplifier, however the protection circuit
will prevent damage in the case of accidental shorting.
Mira 3 manual.qxd 10/12/2002 11:24 Page 14