Owner`s manual

31
Systems
The 120 volt shore power switch is located between the
line voltage and load current meters. With the shore pow-
er switch in the “center” position it is off. When the shore
power switch is toggled to the left the line voltage meter
will display up to 120 volts available at Shore 1. As equip-
ment breakers are activated the load current (amperage)
meter will ascend and descend as equipment breakers are
deactivated.
When the shore power switch is toggled to the right the
line voltage meter will display up to 120 volts available at
Shore 2. As equipment breakers are activated the load cur-
rent (amperage) meter will ascend and descend as equip-
ment breakers are deactivated.
As a general note on equipment breakers when leaving
the yacht it is recommended that most breakers be turned
off.
It may be necessary depending on your needs to leave the
shore power cords hooked up and the battery charger on
during extended periods along with the salon refrigerator.
Since the refrigerator is dual voltage (12 and 120) make
sure the DC refrigerator breaker is activated and the AC
refrigerator breaker is deactivated upon leaving the ves-
sel.