Owner`s manual

Downrod
C
ollar cover
Blade
B
lade Arm
C
anopy
Verify that you have all par
ts before beginning the installation. Check foam insert closely for missing parts. Remove
motor
from packing. T
o avoid damage to finish, assemble motor on soft padded sur
face or use the original
foam inset in
motor box. Do not lay fan on its side as this could result in shifting of motor in decorative enclosure.
Caution: To avoid possible electric shock, be sure
electricity is turned off at the main power box before
wiring. All wiring must be in accordance with National
and Local Electrical Codes and the ceiling fan must be
grounded as a precaution against possible electrical
shock.
1. Locate ceiling joist where fan is to be mounted,
being sure location agrees with the requirements in
the minimum clearance section of this guide. Wood
joist must be sound and of adequate size to support
35 lbs. (See page 1, #4)
2. If not already present, mount a UL listed outlet box
marked “suitable for fan support”, following the
instructions provided with the outlet box. The
outlet box must be able to support a minimum of 35
pounds.
3. Attach hanging bracket to outlet box using scr
ews provided with the outlet box.*
PREPARATION
4
Parts identification on assembled fan
INSTALLING THE HANGING BRACKET
* Parts other than hanging bracket are
supplied with outlet box.