Owner`s manual

INSTALLING THE FAN

HANGING THE FAN:

1. Be sure your mounting bracket is secure. The entire

weight of the fan will now be hanging from it.

2. Lift fan/downrod/ball assembly into mounting bracket

opening. NOTE: The tab opposite mounting bracket

opening should fit into slot on ball (Fig. 5).

3. Make wire connections, (refer to section titled “Electrical

Connections”). Fan can be operated by a fan wall control

OR by the supplied remote control.

4. Slide canopy up and fasten to mounting bracket with

screws provided AFTER all electrical connections are

complete.

INSTALLING LIGHT:

1. Screw bulb into socket by holding ceramic base or cover-

ing glass with tissue. CAUTION: DO NOT touch glass

part of halogen bulb with bare fingers. The oils in your

hands can cause a halogen bulb to break after it gets hot.

2. Screw glass shade into fan housing. Make sure glass is

secure but not overly tight (Fig. 6).