Owner`s manual

ELECTRICAL CONNECTIONS (WALL CONTROL)
ELECTRICAL CONNECTIONS: ✫ Be sure electricity is turned off at the main power box before wiring.
1. Four wires are connected to the fan.
Black - this is the “hot” power to run fan, also referred to as “AC line” or “supply”.
White - this is the “common” power to run fan and light, also referred to as “AC neutral”.
Blue - this is the “hot” power for light kit.
Green - ground wire (attached to bracket).
2. For wall control (not included) installation, follow the wiring guide below. For remote control (included) instal-
lation, see following page for instructions.
✫ A suitable “ceiling fan speed control” must be purchased separately from your ceiling fan dealer, one that will control both
light and fan separately. Otherwise, follow the instruction on the following page to install the supplied wireless remote
control.
8
For wall control
installation
Fan and light controlled by
independent wall switches.