Owner`s manual

PREPARATION

Parts identification on assembled fan

Downrod

Canopy

Fan Housing

Blade

Blade Arm

Glass Shade

PREPARATION:

Verify you have all parts before beginning the installation. Check foam insert closely for missing parts. Remove motor

from packing. To avoid damage to finish, assemble motor on soft padded surface or use the original foam inset in motor

box.

Do not lay motor housing on its side as this could result in shifting of motor in decorative enclosure.

Caution: To avoid possible electrical shock, be sure

electricity is turned off at the main power box before

wiring. All wiring must be in accor

dance with National

and Local Electrical Codes and the ceiling fan must be

grounded as a precaution against possible electric shock.

1. Locate ceiling joist where fan is to be mounted, being

sur

e location agr

ees with the requirements in the

minimum clearance section of this guide. Wood joist

must

be sound and of adequate size to suppor

t 70 lbs.

(See Page 1, Items 3 and 4).

2. If not already present, mount a UL listed outlet box

marked “suitable for fan support” following the

instructions provided with the outlet box. The outlet

box must be able to support a minimum of 70

pounds.

3. Attach hanging bracket to outlet box using screws provided with the outlet box.

INSTALLING THE HANGING BRACKET