Installation manual

Regency
®
E18 Gas Fireplace Insert
35
INSTALLATION
Diagram 1.8
Diagram 1.9
Diagram 1.10
Diagram 1.11
Diagram 1.13
Diagram 1.12
11. Remove Top Front Flange of Firesong fi rebox. (See Diagram 1.8).
Remove tabs on right and left side of fi rebox.
12. Cut out mid section of Firesong fi rebox . (See Diagram 1.9).
Cut off bar at back of fi rebox.
14. Cut out right side of existing Firesong fi rebox. (See
Diagrams1.11,1.12 and 1.13). Left and right cutout begins on
front face - see diagram 1.12
IMPORTANT: Cut out Firesong fi rebox and install support one side
at a time.
Back bar
13. Remove 6 screws, one at a time, and replace with pan head
(wafer screws) - in locations shown below.