User`s manual

Section 3. Using Your Model 4720 Security System
User's Manual Page 17
Programming Your 4720 Security System
Your security dealer or installer will complete all initial programming for
you. However, as time goes on, you will undoubtedly want to make
changes.
Most program changes will be handled by your installer, but resetting time
and date displays and changing access codes are two functions you can do
yourself from the touchpad.
One important thing to remember is that your system is disabled when you
are in programming mode. You will not be protected until you exit
programming mode.
Resetting the Time
1. Press 9 .
2. Press TEST .
3. Enter your main access code. The display will now read TIME?.
4. Enter a 6-digit time setting. The first digit is for the day of the week.
Choose the number of the day from the list below:
1 Monday 5 Friday
2 Tuesday 6 Saturday
3 Wednesday 7 Sunday
4 Thursday
The second digit is 0=AM or 1=PM
Enter the last four digits as the actual time in hours and minutes.
Upon pressing the sixth digit, the touchpad will return to its normal
operation with the correct time in place.
Example: To reset the time for Tuesday 3:15 PM you would enter the
following:
Remember to include a leading zero before 1-digit numbers when entering
the time portion.
Technical Manuals Online! - http://www.tech-man.com