Installation manual

Regency

Model 4734 Access Control Expander Installation Manual (P/N 150807, Rev. A) Revised 5/98

UP/DOWNLOAD:YES

Select YES to enable remote uploading and downloading. When the panel receives a signal for

downloading it will dial the computer phone number and use the account number that is pro-

grammed for Account #4.

FAIL ATTM:5

Enter the number of attempts (1-15) that the communicator will try to dial out before it gives a

dialer-failed signal.

TOTAL ATTM: 10

Enter the overall number of attempts (1-15) that the communicator will try to dial out using all

phone numbers. Select 0 for both FAIL ATTM and TOTAL ATTM for a local-only system.

# RINGS:1

This option is used in conjunction with the downloading feature. You would program the num-

ber of times (1-15) that your phone will ring before the communicator will dial out or answer

for downloading information. If you do not wish to use this feature, enter 0. If you also

selected ANSWER and REP, ALL O/C, the panel will answer after four fewer rings (than the

programmed number) if the system is armed (but see the note below).

NOTE The panel will never answer unless it detects at least two rings.

LOW AC:4h

For this option, program the number of hours (1-15) that the AC power must be OFF before a

Low-AC Report is generated.

DTMF L1:NO

If this option is selected, Line 1 will use Touch-Tone

dialing. If you do not select this option,

the phone line will use rotary type dialing only.

NOTE If you have selected DTMF L1, the dialer will alternate between Touch-Tone

and rotary dial-

ing on subsequent attempts.

DTMF L2:NO

If this option is selected, Line 2 will use Touch-Tone

dialing.

DTMF ONLY:NO

If this option is selected, Touch-Tone

dialing will be used any time the system is dialing out.

ALT ANS BYP:NO

If this option is selected, an alternate method of answering machine bypass is used. To contact

the panel, dial the panel and hang up after hearing one ring. Redial the panel immediately

(within 30 seconds) and the panel will answer on the first ring. Use this option in situations

where the default answering machine bypass will not work.

DTMF RX:NO

This option is for future expansion. Select NO at this time.

5.9 Zone Options (Menu 8)

ZONE:#1

Select the zone for which you want to reprogram the options.