Installation manual

Regency
®
Model 4734 Access Control Expander Installation Manual (P/N 150807, Rev. A) Revised 5/98
48
screen, followed by “Press ESC to terminate, Waiting for Answer...”
Several seconds will elapse before the call goes through and the screen indicates that download-
ing is taking place.
6.4.2 Printing the Options
To print the data from a particular options menu, go to the menu and press F3.
6.4.3 Verifying The Selections
To make sure the correct data has been downloaded to the subscriber’s panel, you may wish to have
the panel send the data back, so you can review it.
On the 4734 Panel menu, select E then follow the prompts to upload the data from the 4734 to your
computer. To view the uploaded data, select B on the 4734 Panel menu. To save the uploaded data,
select C on the menu.
CAUTION! Before editing or modifying an upload, you must SAVE it.
6.5 Programming the I/O Statements
6.5.1 What The I/O Statements Do
NOTE It is easier to program the I/O statements using the Model 5540 Downloading Software. Because it
may sometimes be useful to program them with the built-in programmer, the procedure is explained
in Section 5.19 of this manual.
The 4734’s programmable I/O capability allows you to configure auxiliary output devices to act as
indicators of internal status conditioners to respond to the internal conditions in some way. The fol-
lowing figure shows the I/O programming software in relation to the programmable output devices.
Figure 5: Auxiliary Devices
16 OUTPUTS,
4 RELAYS EACH
8457G35A.DSF
LAMPS, APPLIANCES, ETC
MODEL 4180
#1
4734
USER
PROGRAM
ZONE STATUS ALARMS,
TIME WINDOWS,
ENTRY/EXIT
AREA STATUS,
KEY COMMAND,
AUX. CONTROL,
DIALER STATUS,
ETC.
MODEL 4180
#2
.
UP TO 32 X-10 MODULES
4181 (PL513)
POWERLINE
INTERFACE
LONG RANGE RF,
STATUS DISPLAY
DEVICES, ETC.
HOUSE
WIRING