User guide

41
Regency Bellavista™ B36X Gas Fireplace
INSTALLATION
DC Sparker Battery Replacement
23) Locate the Piezo Ignitor situated at the right side of the
valve assembly.
24) Remove the Piezo Ignitor wire from the back of the Piezo Ignitor.
25) Connect the ignitor wire from the Piezo to the DC sparker.
1) Remove the battery cover from the DC Sparker - remove the AA
battery.
2) Replace with a new 'AA' battery and reinstall battery cover.
Piezo
Ignitor
Ignitor
Wire
Piezo
Ignitor
Ignitor
Wire
DC
Sparker
DC Sparker
Generator Wires
26) Connect the DC spark generator wires to the SIT Valve.
Secure with a phillips head screw as shown below.
27) Plug the DC spark generator wires to the DC Sparker.
28) Remove the battery cover from the DC Sparker and install 1 -
'AA' battery in the DC Sparker and then install the DC Sparker to
the fl oor of the unit, left of the valve assembly, with two Phillips
screws.
Installation of the DC Sparker:
DC SPARKER INSTALLATION