Manual

E33 FPI Direct Vent Gas Insert

INSTALLATION

6) Place 2 screws through the screw holes on the hinge and place a

spacer over each screw.

7) Secure the hinge to the bottom ﬂ ange of the ﬁ rebox with 2 screws

from step 6. Repeat for other side.

Screw

Spacer

8) Align the left and right side hinge with the screw holes in the bottom

louver and secure in place using 3 screws per side.

9) Install the door frame by hooking the top ﬂ ange over top of the glass

door, push in the bottom of the door frame to secure in place.

NOTE: To ensure the gap between the door frame and faceplate legs

are equal (approximately 1/2" on each side) you may need to slide

the door frame slightly to the left or right accordingly.

Door Frame Flange

10) Close the bottom louver.

Completed Faceplate & Door Frame Installation

Glass Door

5) Secure the bottom of the faceplate to the ﬁ rebox ﬂ ange using one

screw on each side.

NOTE: Ensure that the bottom of the faceplate leg is aligned with the

screw hole on the inner side of the ﬁ rebox ﬂ ange.

Faceplate secured to inner side of ﬁ rebox ﬂ ange.