Instruction Manual

Regency U31-3 Gas Fireplace Insert

INSTALLATION

FULL SCREEN FRONT

1) Hold the full screen door up against the unit in order to make the

following wire connections.

Pull the ON/OFF connector wires from the ﬁ rebox and connect them

to the switch.

Connect the fan switch wires with the wire connectors from the fan

speed control. Place clips over wires and tuck into side trim.

2) Lift unit up slightly and push down on the corners of the Bottom Trim

Bracket and slide under unit. Unit should touch tabs on Bottom Trim

Bracket.

Bottom Trim Bracket

Push in Corners

3) Completely secure the full screen door to the unit by securing 4

screws to the Left and Right Side Trims.

NOTE: When mounting the full screen door to the unit, the inside

ﬂ ange of the side trims are to ﬁ t over the inner side of the unit ﬂ ange

and NOT next to the outer side of the unit ﬂ ange.

Inside ﬂ ange of Side Trim goes over

the inner side of the unit ﬂ ange.