Installation manual

18
F5100 Regency Freestanding Woodstove
INSTALLATION
STAINLESS STEEL SMOKE DEFLECTOR INSTALLATION / REPLACEMENT:
The stainless smoke defl ector is located in the upper front area of the fi rebox. The defl ector is held in place with 2 bolts
Prior to the fi rst fi re, ensure defl ector is seated properly and secured with 2 hand tightened bolts.
To replace the defl ector, loosen off both bolts and slide defector upward and
out. Install new defector and hand tighten bolts. Ensure positive location
of the defl ector prior to hand tightening.
WARNING: Operation of the unit with out proper installation of smoke
defl ector will void warranty.
Smoke defl ector installed with 2 bolts.
Note: This is a view from inside the
fi rebox looking out.
Ensure defector is seated so bolts are situated
at the top of the keyhole before tightening.
Hand tighten bolts only.
Smoke defl ector
Correct Install:
Ensure return edge of smoke defl ector is seated within the backside of
the glass wash.
Incorrect Install:
Return edge of smoke defl ector seated under glass wash.