User guide

Regency Freestanding Woodstove

INSTALLATION

FACTORY

BUILT CHIMNEY

When a metal prefabricated chimney is used, the manufacturer's installation instructions must be followed. You must also purchase and install the

ceiling support package or wall pass-through and "T" section package, firestops (where needed), insulation shield, roof flashing, chimney cap,

etc. Maintain proper clearance to the structure as recommended by the manufacturer. The chimney must be the required height above the roof

or other obstructions for safety and proper draft operation.

MASONRY

CHIMNEY

Ensure that a masonry chimney meets the

minimum standards of the National Fire Protec-

tion Association (NFPA) by having it inspected

by a professional. Make sure there are no

cracks, loose mortar or other signs of deterio-

ration and blockage. Have the chimney cleaned

before the stove is installed and operated.

When connecting the stove through a combus-

tible wall to a masonry chimney, special meth-

ods are needed.

MASONRY

FIREPLACE

There are listed kits available to connect a stove

to a masonry fireplace. The kit is an adapter that

is installed at the location of the fireplace damp-

er. The existing damper may have to be re-

moved to allow installation.