Use and Care Manual

Parts:

E: Bolts

J: Small

Washer

K: Large

Washer

D: Control

I: Tension Knob

IMPORTANT NOTICE:

Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid scratching the parts.

Check to be sure that you have all parts and hardware.

Remove all wrapping materials, including staples & packing straps before you start to assemble.

Keep all hardware parts and packaging out of reach of children.

Any problems or questions call Regency O󰀩ce Furniture at 1-866-816-9822 or email customerservice@regencyof.com

5083BK Carter Swivel Chair – 5083MBK Carter Swivel Chair with Arms • INSTRUCTIONS

Organize your parts.

Hardware:

C: Cylinder

H: Spider

Quantity: 5

B: Cover

G: Seat

Quantity: 4

Quantity: 1

Quantity: 1 Quantity: 1

Quantity: 1

Quantity: 4

Quantity: 1

A: Spider

F: Back

PAGE 1
5083BK Carter Swivel Chair – 5083MBK Carter Swivel Chair with Arms • INSTRUCTIONS Organize your parts.
PAGE 2
5083BK Carter Swivel Chair – 5083MBK Carter Swivel Chair with Arms • INSTRUCTIONS Organize your parts. STEP 1: Insert all 5 Feet (H) into the Spider (A). STEP 2A: Insert Cylinder (C) into Cover (B). B C STEP 2B: Insert Cylinder (C) and Cover (B) into Spider (A). H H H A H A H STEP 3A: Attach Control (D) to underside of Seat (G) by lining up Control (D) with prexisting holes on Seat (G). Please Note: The Control Handle should be hanging off of the Left side of the Seat.
PAGE 3
5083BK Carter Swivel Chair – 5083MBK Carter Swivel Chair with Arms • INSTRUCTIONS Organize your parts. STEP 5: Attach completed seat to completed base by lining up hole in Control (D) with the Cylinder (C) and pressing down into place. D D C C Optional Arm Attachment: 5083ARM L: Arm M: Screw STEP 1: Line up Arm (C) with holes on the underside of Seat (G). Attach by inserting Washers (N) and Screws (M) into each hole, and tightening with provided Hex Key.