Instructions / Assembly

ManualsBrandsRegency ManualsBookcasesMagons 71 in. Mahogany Wood 6-shelf Standard Bookcase with Adjustable Shelves

Any problems or questions call Regency Ofce Furniture at 1-866-816-9822

IMPORTANT NOTICE:

● Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.

● Check to be sure that you have all parts and hardware.

● Remove all wrapping materials, including staples & packing straps before you start to assemble.

● Do not tighten all screws/bolts until completely assembled.

● Keep all hardware parts out of reach of children.

LBC7132 (L7132BC), VBC7132 (V7132BC) - INSTRUCTIONS

Step 3: Attach Back Pieces (J, K)

together with the Double Cam Lock

(A). Secure

pieces

together

by turning

cams

clockwise as

shown.

Step 7: Place

Caps (D) over

visible Cams.

Step 8: Thread Locking Support

Pins (C) into place. Place Center

Shelf (N) onto supports; turn lock

with screwdriver to secure.

Step 6: Attach Sides (I, L) to Top,

Bottom, and Back Pieces; turn cams

clockwise

to secure.

Step 5: Attach

Top and Bottom

Shelves (H, O)

to Back Pieces

(J, K); turn

cams

clockwise to

secure.

Step 2: Check

Cams to

make sure

that the arrow

is pointing

toward the

hole in the side

as shown.

Step 1: Thread Cam Locks (E) into

small holes in Sides, Back pieces,

and Top.

Organize your parts and hardware. Hardware should include:

A) 1 Double Cam Lock

B) 16 Shelf Support Pins

C) 4 Locking Shelf Support

Pins (4 Locks should already

be in Center Shelf

D) 14 Caps

E) 18 Cam Locks

F) 6 Screws G) 1 L-Bracket

NOTE: 20 Cams (shown in

Step 2) should already be

placed in wooden parts.

Wooden Components include:

H) 1 Top Shelf I) 1 Left Side J) 1 Left Back K) 1 Right Back L) 1 Right Side

M) 4 Adjustable Shelves N) 1 Locking Center Shelf O) 1 Bottom Shelf P) 1 Bottom Support

NOTE: When identifying components, remember that the bottom edge of the Side and Back Pieces is black.

Tools Required: Phillips Screwdriver

B C

Step 4: Attach Bottom Support (P)

to Bottom Shelf (O); insert dowel

rods on the Support into holes on the

bottom of Shelf. Attach L-Bracket

(G) with Screws (F) as shown.

E G

JI K L

Step 9: Using

Shelf Support

Pins (B), position

adjustable

shelves (M) as

desired.