Instructions / Assembly

Any problems or questions call Regency O󰀩ce Furniture at 1-866-816-9822 or email [e-mail]
STEP 1B (Round Table Top): Place Table Top(C) on a clean at surface with
desired table nish face
down. Using a tape measure, position Adjustable Legs(B) at an equal distance from one another as
shown in Figure B. Then, attach the assembled Legs to Table Top using 7 Screws(A) per Leg.
C
Figure B
MABP27
·
Kee Adjustable Table Leg INSTRUCTIONS
You will need 2 person(s) for this assembly.
You will need a Phillips Head Screw Driver and a Tape Measure to Assemble.
EQUAL
EQUAL
EQUAL
EQUAL
STEP 1C (Rectangle Table Top): Place Table Top(C) on a clean at surface with desired table nish face
down. Position Adjustable Legs(B) as shown in Figure C. Then, attach assembled Legs to Table Top using
7 Screws(A) per Leg.
C
Figure C
STEP 2: Using 2 people, ip the table over and adjust leveling glides accordingly.
*NOTE: Place Legs at
least 1-inch away from
Edge Table*
*NOTE: Place Legs at
least 1-inch away from
Edge Table*