Use and Care Manual

Any problems or questions call Regency O󰀩ce Furniture at 1-866-816-9822 or email [e-mail]
STEP 2: Using 2 people, ip the table over and adjust leveling glides accordingly.
STEP 3 (Adjusting Leg Height): Insert Allen Wrench(D) into adjustment bolt and turn counter-clockwise to loosen
bolt (see Figure D.) Adjust leg to desired height, and then turn bolt clockwise until snug to secure the leg height (see
Figure E.) Repeat step for each leg.
Figure D Figure E
Note: Adjustment bolt will not fully tighten until it is lined up with one of the pre-drilled notches.
MABP27BK • Kee Adjustable Leg Installation for Ferris Tables
Needed for Assembly: 2 person(s), x1 Phillips Head Screw Driver/Drill
Optional for Assembly: x1 Tape Measure, Marking Tool (pencil, marker, etc.)