Owner`s manual

INSTALLING THE FAN - DOWNROD STYLE
1. Lift ball/downrod/fan into hanger bracket opening. NOTE:
NOTE:
The tab opposite hanger bracket opening should fit in slot
on ball.
2. Make wire connections, (refer to section titled "Electrical Connections").
3. Slide canopy up and fasten to hanger bracket with 4 screws provided.
WARNING:
WARNING:
To avoid damaging the blade arms and blades, do not install them onto fan until fan is fastened to ceiling.
8
INSTALLATION OPTION #2: DOWNROD STYLE MOUNTING (CONT.)
Hanger
Bracket Tab
Ball Slot
Ball